ISC PHYSICS SYLUBUS 2012-2013
PHYSICS (861)
Aims:
1. To enable candidates to acquire knowledge and
to develop an understanding of the terms, facts,
concepts, definitions, fundamental laws,
principles and processes in the field of physics.
2. To develop the ability to apply the knowledge
and understanding of physics to unfamiliar
situations.
3. To develop a scientific attitude through the study
of physical sciences.
4. To develop skills in -
(a) the practical aspects of handling apparatus,
recording observations and
(b) drawing diagrams, graphs, etc.
5. To develop an appreciation of the contribution
of physics towards scientific and technological
developments and towards human happiness.
6. To develop an interest in the world of physical
sciences.
CLASS XI
There will be two papers in the subject.
Paper I: Theory - 3 hour ... 70 marks
Paper II: Practical - 3 hours ... 20 marks
Project Work … 7 marks
Practical File … 3 marks
PAPER I -THEORY – 70 Marks
Paper I shall be of 3 hours duration and be divided
into two parts.
Part I (20 marks): This part will consist of
compulsory short answer questions, testing
knowledge, application and skills relating to
elementary/fundamental aspects of the entire syllabus.
Part II (50 marks): This part will be divided into
three Sections A, B and C. There shall be six
questions in Section A (each carrying 7 marks) and
candidates are required to answer four questions
from this Section. There shall be three questions in
Section B (each carrying 6 marks) and candidates are
required to answer two questions from this Section.
There shall be three questions in Section C (each
carrying 5 marks) and candidates are required to
answer two questions from this Section. Therefore,
candidates are expected to answer eight questions in
Part II.
Note: Unless otherwise specified, only S. I. Units are
to be used while teaching and learning, as well as for
answering questions.
SECTION A
1. Role of Physics
(i) Scope of Physics.
Applications of Physics to everyday life. Inter-
relation with other science disciplines.
Physics learning and phenomena of nature;
development of spirit of inquiry, observation,
measurement, analysis of data, interpretation
of data and scientific temper; appreciation for
the beauty of scheme of nature.
(ii) Role of Physics in technology.
Physics as the foundation of all technical
advances - examples. Quantitative approach
of physics as the beginning of technology.
Technology as the extension of applied
physics. Growth of technology made possible
by advances in physics. Fundamental laws of
nature are from physics. Technology is built
on the basic laws of physics.
(iii) Impact on society.
Effect of discoveries of laws of nature on the
philosophy and culture of people. Effect of
growth of physics on our understanding of
natural phenomenon like lighting and
thunder, weather changes, rain, etc. Effect of
study of quantum mechanics, dual nature of
matter, nuclear physics and astronomy on the
macroscopic and microscopic picture of our
universe.
2. Units
(i) SI units. Fundamental and derived units
(correct symbols for units including
conventions for symbols).
Importance of measurement in scientific
studies; physics is a science of measurement.
Unit as a reference standard of measurement;
essential properties. Systems of unit; CGS,
FPS, MKSA, and SI; the seven base units of SI
selected by the General Conference of
Weights and Measures in 1971 and their
definitions; list of fundamental physical
quantities; their units and symbols, strictly as
per rule; subunits and multiple units using
prefixes for powers of 10 (from atto for 10-18
to tera for 1012); other common units such
as fermi, angstrom (now outdated), light year,
astronomical unit and parsec. A new unit of
mass used in atomic physics is unified atomic
mass unit with symbol u (not amu); rules for
writing the names of units and their symbols
in SI (upper case/lower case, no period after
symbols, etc.)
Derived units (with correct symbols); special
names wherever applicable; expression in
terms of base units (eg: N= kgm/s2).
(ii) Accuracy and errors in measurement, least
count of measuring instruments (and the
implications for errors in experimental
measurements and calculations).
Accuracy of measurement, errors in
measurement: instrumental errors, systematic
errors, random errors and gross errors. Least
count of an instrument and its implication for
errors in measurements; absolute error,
relative error and percentage error;
combination of error in (a) sum and
difference, (b) product and quotient and (c)
power of a measured quantity.
(iii) Significant figures and order of accuracy with
reference to measuring instruments. Powers of
10 and order of magnitude.
What are significant figures? Their
significance; rules for counting the number of
significant figures; rules for (a) addition and
subtraction, (b) multiplication/division;
‘rounding off’ the uncertain digits; order of
magnitude as statement of magnitudes in
powers of 10; examples from magnitudes of
common physical quantities - size, mass, time,
etc.
3. Dimensions
(i) Dimensional formula of physical quantities
and physical constants like g, h, etc. (from
Mechanics only).
Dimensions of physical quantities;
dimensional formula; express derived units in
terms of base units (N = kg.ms-2); use symbol
[...] for dimension of or base unit of;
ex: dimensional formula of force in terms of
base units is written as [F]=[MLT –2].
Expressions in terms of SI base units may be
obtained for all physical quantities as and
when new physical quantities are introduced.
(ii) Dimensional equation and its use to check
correctness of a formula, to find the relation
between physical quantities, to find the
dimension of a physical quantity or constant;
limitations of dimensional analysis.
Use of dimensional analysis to (i) check the
dimensional correctness of a formula/
equation, (ii) to obtain the exact dependence
of a physical quantity on other mechanical
variables, and (iii) to obtain the dimensional
formula of any derived physical quantity
including constants; limitations of
dimensional analysis.
4. Vectors, Scalar Quantities and Elementary
Calculus
(i) Vectors in one dimension, two dimensions and
three dimensions, equality of vectors and null
vector.
Vectors explained using displacement as a
prototype -along a straight line
(one dimension), on a plane surface
(two dimension) and in open space not
confined to a line or plane (three dimension);
symbol and representation; a scalar quantity,
its representation and unit, equality of
vectors. Unit vectors denoted by
iˆ
,jˆ
,kˆorthogonal unit vectors along x, y and
z axes respectively. Examples of one
dimensional vector =a1V
..
iˆ
or bjˆ
or ckˆ
where a, b, c are scalar quantities or
numbers; 2V
..
= aiˆ
+ bjˆ
is a two dimensional
vector, 3V
..
= a iˆ
+ bjˆ
+ ckˆ is a three
dimensional vector. Define and discuss the
need of a null vector. Concept of co-planar
vectors.
(ii) Vector operations (addition, subtraction and
multiplication of vectors including use of unit
vectors iˆ,jˆ
,kˆ); parallelogram and triangle
law of vector addition.
Addition: use displacement as an example;
obtain triangle law of addition; graphical and
analytical treatment; Discuss commutative and
associative properties of vector addition (Proof
not required). Parallelogram Law; sum and
difference; derive expression for magnitude
and directions from a parallelogram; special
cases; subtraction as special case of addition
with direction reversed; use of Triangle Law
for subtraction also; if a+ =; ..b
..
c..c..- a..= b
..
;
In a parallelogram, if one diagonal is the sum,
the other diagonal is the difference; addition
and subtraction with vectors expressed in
terms of unit vectors iˆ
,jˆ
,kˆ; multiplication of
a vector by real numbers.
(iii) Resolution and components of like vectors in a
plane (including rectangular components),
scalar (dot) and vector (cross) products.
Use triangle law of addition to express a
vector in terms of its components. If a..+
=c is an addition fact, c= + b
......a..b
..
is a
resolution; and are components of a..b
..
c...
Rectangular components, relation between
components, resultant and angle in between.
Dot (or scalar) product of vectors or scalar
product.=abcos.; example W =a..b
..
F
..
.S
..
Special case of . = 0, 90 and 1800. Vector (or
cross) product ax=[absin.]n..b
..
ˆ; example:
torque t..
= x; Special cases using unit
vectors ,
r..F
..
ˆijˆ
,kˆ for . and x. a..b
..
a..b
..
[Elementary Calculus: differentiation and
integration as required for physics topics in
Classes XI and XII. No direct question will be
asked from this subunit in the examination].
Differentiation as rate of change; examples
from physics – speed, acceleration, etc.
Formulae for differentiation of simple
functions: xn, sinx, cosx, ex and ln x. Simple
ideas about integration – mainly..xn.dx. Both
definite and indefinite integral should be
explained.
5. Dynamics
(i) Cases of uniform velocity, equations of
uniformly accelerated motion and applications
including motion under gravity (close to
surface of the earth) and motion along a
smooth inclined plane.
Review of rest and motion; distance and
displacement, speed and velocity, average
speed and average velocity, uniform velocity,
instantaneous speed and instantaneous
velocity, acceleration, instantaneous
acceleration, s-t, v-t and a-t graphs for
uniform acceleration and discussion of useful
information obtained from the graphs;
kinematic equations of motion for objects in
uniformly accelerated rectilinear motion
derived using calculus or otherwise, motion of
an object under gravity, (one dimensional
motion). Acceleration of an object moving up
and down a smooth inclined plane.
(ii) Relative velocity, projectile motion.
Start from simple examples on relative
velocity of one dimensional motion and then
two dimensional motion; consider
displacement first; relative displacement
(use Triangle Law); then
differentiating we get
-ABABSSS=
......
ABAvvv=-......;
projectile motion; Equation of trajectory;
obtain equations for max. height, velocity,
range, time of flight, etc; relation between
horizontal range and vertical range
[projectile motion on an inclined plane not
included]. Examples and problems on
projectile motion.
(iii) Newton's laws of motion and simple
applications. Elementary ideas on inertial and
uniformly accelerated frames of reference.
[Already done in Classes IX and X, so here
it can be treated at higher maths level using
vectors and calculus].
Newton's first law: Statement and
explanation; inertia, mass, force definitions;
law of inertia; mathematically, if SF=0, a=0.
Newton's second law:p..
=m; v..F
..
a dpdt
..
;
F
..
=k dpdt
..
. Define unit of force so that
k=1;= F
..dpdt
..
; a vector equation. For
classical physics with v not large and mass
m remaining constant, obtain F
..
=ma...
For v. c, m is not constant. Then
m = 22ocv-1m. Note that F= ma is the
special case for classical mechanics. It is a
vector equation. || . Also, this can be
resolved into three scalar equations Fa..F
..
x=max
etc. Application to numerical problems;
introduce tension force, normal reaction
force. If a = 0 (body in equilibrium), F= 0.
Impulse F.t =.p; unit; problems.
Newton's third law. Simple ideas with
examples of inertial and uniformly
accelerated frames of reference. Simple
applications of Newton’s laws: tension,
normal reaction; law of conservation of
momentum. Systematic solution of problems
in mechanics; isolate a part of a system,
identify all forces acting on it; draw a free
body diagram representing the part as a point
and representing all forces by line segments,
solve for resultant force which is equal to
m. Simple problems on “Connected bodies”
(not involving two pulleys).
a..
(iv) Concurrent forces (reference should be made
to force diagrams and to the point of
application of forces), work done by constant
and variable force (Spring force).
Force diagrams; resultant or net force from
law of Triangle of Forces, parallelogram law
or resolution of forces. Apply net force
S= ma. Again for equilibrium a=0
and SF=0. Conditions of equilibrium of
a rigid body under three coplanar
forces. Discuss ladder problem. Work
done W==FScos.. If F is
variable dW=.dS and W=.dw=
F
....
F
..
.S
..
F
....
F...
.dS
..
,
for¦ .=FdS therefore, W=.FdS
is the area under the F-S graph or if F can be
expressed in terms of S, .FdS can be
evaluated. Example, work done in stretching a
springF
..
dS
..
F
..
dS
..
212WFdxkxdxkx===... This is
also the potential energy stored in the
stretched spring U=½ kx2 .
(v) Energy, conservation of energy, power,
conservation of linear momentum, impulse,
elastic and inelastic collisions in one and two
dimensions.
E=W. Units same as that of work W; law of
conservation of energy; oscillating spring.
U+K = E = Kmax = Umax (for U = 0 and K = 0
respectively); different forms of energy
E = mc2; no derivation. Power P=W/t; units;
.PFv=
....; conservation of linear momentum
(done under Newton's 3rd law); impulse Ft or
F.t. unit N.s and joule- done under 2nd law.
Collision in one dimension; derivation of
velocity equation for general case of m1 . m2
and u1 . u2=0; Special cases for m1=m2=m;
m1>>m2 or m1<<m2. Oblique collisions i.e.
collision in two dimensions.
6. Friction
(i) Friction in solids: static; sliding; rolling.
Static friction, a self-adjusting force; limiting
value; kinetic friction or sliding friction;
rolling friction, examples.
(ii) Laws of friction. Co-efficient of friction.
Laws of friction: Two laws of static friction;
(similar) two laws of kinetic friction;
coefficient of friction µs = fs(max)/N and
µk
= fk/N; Friction as a non conservative
force; motion under friction, net force in
Newton’s 2nd law is calculated including fk;
numerical problems applying laws of friction
and Newton's second law of motion. Motion
along a rough inclined plane – both up and
down. Pulling and pushing of a roller. Angle
of friction and angle of repose.
7. Motion in Fluids
(i) Equation of continuity of fluid flow and its
application, buoyancy, Bernoulli's principle,
(venturimeter, pitot tube, atomizer, dynamic
uplift). Pressure in a fluid, Pascal’s law.
General characteristics of fluid flow; equation
of continuity v1a1 = v2a2; conditions;
applications like use of nozzle at the end of a
hose; buoyancy; Bernoulli’s principle
(theorem); assumptions - incompressible
liquid, streamline (steady) flow, non-viscous
and irrotational liquid - ideal liquid;
derivation of equation; applications of
Bernoulli’s theorem as given in the syllabus.
Discuss in brief: Pressure in a fluid, Pascal’s
law.
(ii) Stream line and turbulent flow, Reynold's
number (derivation not required).
Streamline and turbulent flow - examples;
trajectory of fluid particles; streamlines do
not intersect (like electric and magnetic lines
of force); tubes of flow; number of streamlines
per unit area a velocity of flow (from
equation of continuity v1a1 = v2a2); critical
velocity; Reynold’s number - no derivation,
but check dimensional correctness.
(Poisseulle’s formula excluded).
(iii) Viscous drag; Newton's formula for viscosity,
co-efficient of viscosity and its units.
Flow of fluids (liquids and gases), laminar
flow, internal friction between layers of fluid,
between fluid and the solid with which the
fluid is in relative motion; examples; viscous
drag is a force of friction; mobile and viscous
liquids.
Velocity gradient dv/dx (space rate of change
of velocity); viscous drag F = .A dv/dx;
coefficient of viscosity . = F/A(dv/dx)
depends on the nature of the liquid and its
temperature; units: Ns/m2 and dyn.s/cm2=
poise. 1 poise=0.1 Ns/m2; value of . for a few
selected fluids.
(iv) Stoke's law, terminal velocity of a sphere
falling through a fluid or a hollow rigid sphere
rising to the surface of a fluid.
Motion of a sphere falling through a fluid,
hollow rigid sphere rising to the surface of a
liquid, parachute, terminal velocity; forces
acting; buoyancy (Archimedes principle);
viscous drag, a force proportional to velocity;
Stoke’s law; .-t graph.
8. Circular Motion
(i) Centripetal acceleration and force, motion
round a banked track, point mass at the end of
a light inextensible string moving in
(i) horizontal circle (ii) vertical circle and a
conical pendulum.
Definition of centripetal acceleration; derive
expression for this acceleration using
Triangle Law to find .v... Magnitude and
direction of a same as that of .v..;
Centripetal acceleration; the cause of this
acceleration is a force - also called
centripetal force; the name only indicates its
direction, it is not a new type of force, it could
be mechanical tension as in motion of a point
mass at the end of a light inextensible string
moving in a circle, or electric as on an
electron in Bohr model of atom, or magnetic
as on any charged particle moving in a
magnetic field [may not introduce centrifugal
force]; conical pendulum, formula for
centripetal force and tension in the string;
motion in a vertical circle; banking of road
and railway track.
(ii) Centre of mass, moment of inertia:
rectangular rod; disc; ring; sphere.
Definition of centre of mass (cm) for a two
particle system moving in one dimension
m1x1+m2x2=Mxcm; differentiating, get the
equation for vcm and acm; general equation for
N particles- many particles system; [need not
go into more details]; concept of a rigid body;
kinetic energy of a rigid body rotating about a
fixed axis in terms of that of the particles of
the body; hence define moment of inertia and
radius of gyration; unit and dimensions;
depend on mass and axis of rotation; it is
rotational inertia; applications: derive
expression for the moment of inertia, I (about
the symmetry axis) of (i) a particle rotating in
a circle (e.g. electron in Bohr model of
H atom); (ii) a ring; also I of a thin rod, a
rectangular strip, a rectangular block, a solid
and hollow sphere, a ring, a disc and a hollow
cylinder - only formulae (no derivation).
(iii) Parallel axis theorem and perpendicular axis
theorem; radius of gyration.
Statement of the theorems with illustrations
[derivation not required]. Simple applications
to the cases derived under 8(ii), with change
of axis.
(iv) Torque and angular momentum, relation
between torque and moment of inertia and
between angular momentum and moment of
inertia; conservation of angular momentum
and applications.
Definition of torque (vector); t..
= r..x F
..
and
angular momentum l
..
= x r..p..
for a
particle; differentiate to obtain dl
..
/dt=t..
;
similar to Newton’s second law of motion
(linear); angular velocity .=v/r and angular
acceleration a=a/r , hence = I a and l =
I.; (only scalar equation); Law of
conservation of angular momentum; simple
applications.
t
(v) Two-dimensional rigid body motion, e.g.
point mass on string wound on a cylinder
(horizontal axis rotation), cylinder rolling
down inclined plane without sliding.
In addition to the above, also cover: motion of
a ring and a ball rolling down an inclined
plane; expression for linear and rotational
acceleration (a, a) and tension (T) in the
string in the first case (point mass on a string)
and kinetic energy (K) for the second case
(rolling down an inclined plane).
9. Gravitation
(i) Newton's law of universal gravitation;
gravitational constant (G); gravitational
acceleration on surface of the earth (g).
Statement; unit and dimensional formula of
universal gravitational constant, G
[Cavendish experiment not required]; weight
of a body W= mg from F=ma.
(ii) Relation between G and g; variation of
gravitational acceleration above and below the
surface of the earth.
From the Newton’s Law of Gravitation and
Second Law of Motion g = Gm/R2 applied to
earth. Variation of g above and below the
surface of the earth; graph; mention variation
of g with latitude and rotation, (without
derivation).
(iii) Gravitational field, its range, potential,
potential energy and intensity.
Define gravitational field, intensity of
gravitational field and potential at a point in
earth’s gravitational field. Vp = Wap/mo.
Derive the expression (by integration) for the
gravitational potential difference .V = VB-VA
= G.M(1/rA-1/rB); here Vp = V(r) = -GM/r;
negative sign for attractive force field; define
gravitational potential energy of a mass m in
the earth's field; obtain expression for
gravitational potential energy U(r) = Wap=
m.V(r) = -G M m/r; show that for a not so
large change in distance .U = mgh. Relation
between intensity and acceleration due to
gravity. Compare its range with those of
electric, magnetic and nuclear fields.
(iv) Escape velocity (with special reference to the
earth and the moon); orbital velocity and
period of a satellite in circular orbit
(particularly around the earth).
Define and obtain expression for the escape
velocity from earth using energy
consideration; ve depends on mass of the
earth; from moon ve is less as mass of moon is
less; consequence - no atmosphere on the
moon; satellites (both natural (moon) and
artificial satellite) in uniform circular motion
around the earth; orbital velocity and time
period; note the centripetal acceleration is
caused (or centripetal force is provided) by
the force of gravity exerted by the earth on the
satellite; the acceleration of the satellite is the
acceleration due to gravity [g’= g(R/R+h)2;
F’G = mg’].
(v) Geostationary satellites - uses of
communication satellites.
Conditions for satellite to be geostationary.
Uses.
(vi) Kepler's laws of planetary motion.
Explain the three laws using diagrams. Proof
of second and third law (circular orbits only);
derive only T2 a R3 from 3rd law for circular
orbits.
SECTION B
10. Properties of Matter - Temperature
(i) Properties of matter: Solids: elasticity in
solids, Hooke’s law, Young modulus and its
determination, bulk modulus and modulus of
rigidity, work done in stretching a wire.
Liquids: surface tension (molecular theory),
drops and bubbles, angle of contact, work
done in stretching a surface and surface
energy, capillary rise, measurement of surface
tension by capillary rise methods. Gases:
kinetic theory of gases: postulates, molecular
speeds and derivation of p= . .2c, equation
of state of an ideal gas pV = nRT (numerical
problems not included from gas laws).
For solids and liquids; the scope as given
above is clear. For gases; derive p=1/3 .2c
from the assumptions and applying Newton’s
laws of motion. The average thermal velocity
(rms value) crms=v3p/.; calculate for air,
hydrogen and their comparison with common
speeds of transportation. Effect of
temperature and pressure on rms speed of gas
molecules. [Note that pV=nRT the ideal gas
equation cannot be derived from kinetic
theory of ideal gas. Hence, neither can other
gas laws; pV=nRT is an experimental result.
Comparing this with p = . .2c, from kinetic
theory of gas a kinetic interpretation of
temperature can be obtained as explained in
the next subunit].
(ii) Temperature: kinetic interpretation of
temperature (relation between .c2 and T);
absolute temperature. Law of equipartition of
energy (statement only).
From kinetic theory for an ideal gas (obeying
all the assumptions especially no
intermolecular attraction and negligibly small
size of molecules, we get p = (1/3). 2c or
pV = (1/3)M2c. (No further, as temperature
is not a concept of kinetic theory). From
experimentally obtained gas laws we have the
ideal gas equation (obeyed by some gases at
low pressure and high temperature) pV = RT
for one mole. Combining these two results
(assuming they can be combined),
RT=(1/3)M2c=(2/3).½M2c=(2/3)K; Hence,
kinetic energy of 1 mole of an ideal gas
K=(3/2)RT. Average K for 1 molecule = K/N
= (3/2) RT/N = (3/2) kT where k is
Boltzmann’s constant. So, temperature T can
be interpreted as a measure of the average
kinetic energy of the molecules of a gas.
Degrees of freedom, statement of the law of
equipartition of energy. Scales of
temperature - only Celsius, Fahrenheit and
Kelvin scales.
11. Internal Energy
(i) First law of thermodynamics.
Review the concept of heat (Q) as the energy
that is transferred (due to temperature
difference only) and not stored; the energy
that is stored in a body or system as potential
and kinetic energy is called internal energy
(U). Internal energy is a state property (only
elementary ideas) whereas, heat is not; first
law is a statement of conservation of energy,
when, in general, heat (Q) is transferred to a
body (system), internal energy (U) of the
system changes and some work W is done by
the system; then Q=.U+W; also W=.pdV for
working substance an ideal gas; explain the
meaning of symbols (with examples) and sign
convention carefully (as used in physics: Q>0
when to a system, .U>0 when U increases or
temperature rises, and W>0 when work is
done by the system). Special cases for Q=0
(adiabatic), .U=0 (isothermal) and W=0
(isochoric).
(ii) Isothermal and adiabatic changes in a perfect
gas described in terms of curves for
PV = constant and PV. = constant; joule and
calorie relation (derivation for
PV. = constant not included).
Self-explanatory. Note that 1 cal = 4·186 J
exactly and J (so-called mechanical
equivalent of heat) should not be used in
equations. In equations, it is understood that
each term as well as the LHS and RHS are in
the same units; it could be all joules or all
calories.
(iii) Work done in isothermal and adiabatic
expansion; principal molar heat capacities; Cp
and Cv; relation between Cp and Cv
(Cp - Cv = R). Cp and Cv for monatomic and
diatomic gasses.
Self-explanatory. Derive the relations.
Work done as area bounded by PV graph.
(iv) Second law of thermodynamics, Carnot's
cycle. Some practical applications.
Only one statement each in terms of Kelvin’s
impossible steam engine and Clausius’
impossible refrigerator. Brief explanation of
law. Carnot’s cycle - describe realisation
from source and sink of infinite thermal
capacity, thermal insulation, etc. Explain pV
graph (isothermal and adiabatic of proper
slope); obtain expression for efficiency .=1-
T2/T1.
(vi) Thermal conductivity; co-efficient of thermal
conductivity, Use of good and poor
conductors, Searle’s experiment. [Lee’s Disc
method is not required]. comparison of
thermal and electrical conductivity.
Convection with examples.
Define coefficient of thermal conductivity
from the equation for heat flow Q = KA d./dt;
temperature gradient; Comparison of thermal
and electrical conductivities (briefly).
Examples of convection.
(vii) Thermal radiation: nature and properties of
thermal radiation, qualitative effects of nature
of surface on energy absorbed or emitted by
it; black body and black body radiation,
Stefan's law (using Stefan's law to determine
the surface temperature of the sun or a star by
treating it as a black body); Newton's law of
cooling, Wien's displacement law, distribution
of energy in the spectrum of black body
radiation (only qualitative and graphical
treatment).
Black body is now called ideal or cavity
radiator and black body radiation is cavity
radiation; Stefan’s law is now known as
Stefan Boltzmann law as Boltzmann derived it
theoretically. There is multiplicity of technical
terms related to thermal radiation - radiant
intensity I (T) for total radiant power (energy
radiated/second) per unit area of the surface,
in W/m2, I (T) =s T4; dimensions and SI unit
of s. For practical radiators I =.. s T4 where
. (dimension less) is called emmissivity of the
surface material; .=1 for ideal radiators.
The Spectral radiancy R(.). I
(T)=
0Ra.(.) d.. Graph of R(.) vs . for
different temperatures. Area under the graph
is I (T). The . corresponding to maximum
value of R is called .max; decreases with
increase in temperature.
.max a 1/T; .m.T=2898µm.K - Wein’s
displacement law; application to determine
temperature of stars, numerical problems.
From known temperature, we get I (T)= sT4.
The luminosity (L) of a star is the total power
radiated in all directions L=4pr2.I from the
solar radiant power received per unit area of
the surface of the earth (at noon), the distance
of the sun and the radius of the sun itself, one
can calculate the radiant intensity I of the sun
and hence the temperature T of its surface
using Stefan’s law. Numerical problems.
Cover Newton’s law of cooling briefly,
numerical problems to be covered.
[Deductions from Stefan’s law not necessary].
SECTION C
12. Oscillations
(i) Simple harmonic motion.
(ii) Expressions for displacement, velocity and
acceleration.
(iii) Characteristics of simple harmonic motion.
(iv) Relation between linear simple harmonic
motion and uniform circular motion.
(v) Kinetic and potential energy at a point in
simple harmonic motion.
(vi) Derivation of time period of simple harmonic
motion of a simple pendulum, mass on a
spring (horizontal and vertical oscillations).
Periodic motion, period T and frequency f,
f=1/T; uniform circular motion and its
projection on a diameter defines SHM;
displacement, amplitude, phase and epoch
velocity, acceleration, time period;
characteristics of SHM; differential equation
of SHM, d2y/dt2+.2y=0 from the nature of
force acting F=-k y; solution y=A sin (.t+f0)
where .2 = k/m; expression for time period T
and frequency f. Examples, simple pendulum,
a mass m attached to a spring of spring
constant k. Total energy E = U+K (potential
+kinetic) is conserved. Draw graphs of U, K
and E Vs y.
(vii) Free, forced and damped oscillations
(qualitative treatment only). Resonance.
Examples of damped oscillations (all
oscillations are damped); graph of amplitude
vs time for undamped and damped
oscillations; damping force (-bv) in addition
to restoring force (-ky); forced oscillations,
examples; action of an external periodic
force, in addition to restoring force. Time
period is changed to that of the external
applied force, amplitude (A) varies with
frequency of the applied force and it is
maximum when the f of the external applied
force is equal to the natural frequency of the
vibrating body. This is resonance; maximum
energy transfer from one body to the other;
bell graph of amplitude vs frequency of the
applied force. Examples from mechanics,
electricity and electronics (radio).
13. Waves
(i) Transverse and longitudinal waves; relation
between speed, wavelength and frequency;
expression for displacement in wave motion;
characteristics of a harmonic wave; graphical
representation of a harmonic wave; amplitude
and intensity.
Review wave motion covered in Class IX.
Distinction between transverse and
longitudinal waves; examples; define
displacement, amplitude, time period,
frequency, wavelength and derive v=f .;
graph of displacement with time/position,
label time period/wavelength and amplitude,
equation of a progressive harmonic
(sinusoidal) wave, y = A sin (kx-. t);
amplitude and intensity.
(ii) Sound as a wave motion, Newton's formula
for the speed of sound and Laplace's
correction; variation in the speed of sound
with changes in pressure, temperature and
humidity; speed of sound in liquids and solids
(descriptive treatment only).
Review of production and propagation of
sound as wave motion; mechanical wave
requires a medium; general formula for speed
of sound (no derivation). Newton’s formula
for speed of sound in air; experimental value;
Laplace’s correction; calculation of value at
STP; numerical problems; variation of speed
v with changes in pressure, density, humidity
and temperature. Speed of sound in liquids
and solids - brief introduction only. Some
values. Mention the unit Mach 1, 2, etc.
Concept of supersonic and ultrasonic.
(iii) Superimposition of waves (interference, beats
and standing waves), progressive and
stationary waves.
The principle of superposition; interference
(simple ideas only); dependence of combined
wave form, on the relative phase of the
interfering waves; qualitative only - illustrate
with wave representations. Beats (qualitative
explanation only); number of beats produced
per second = difference in the frequencies of
the interfering waves; numerical problems.
Standing waves or stationary waves;
formation by two traveling waves (of . and
f same) traveling in opposite directions
(ex: along a string, in an air column - incident
and reflected waves); obtain y= y1+y2=
[2 ym sin kx] cos(. t) using equations of the
traveling waves; variation of the amplitude
A=2 ymsin kx with location (x) of the particle;
nodes and antinodes; compare standing
waves with progressive waves.
(iv) Laws of vibrations of stretched strings.
Equation for fundamental frequency
f0=(½l)T/m; sonometer, experimental
verification.
(v) Modes of vibration of strings and air columns;
resonance.
Vibrations of strings and air column (closed
and open pipe); standing waves with nodes
and antinodes; also in resonance with the
periodic force exerted usually by a tuning
fork; sketches of various nodes; fundamental
and overtones-harmonics; mutual relation.
(vi) Doppler Effect for sound.
Doppler effect for sound; general expression
for the Doppler effect when both the source
and listener are moving can be given by
which can be reduced to any
one of the four special cases, by applying
proper sign convention.
LLrrvvffvv.±
=.±
..
NOTE: Numerical problems are included from all
topics except where they are specifically excluded
or where only qualitative treatment is required.
PAPER II
PRACTICAL WORK- 20 Marks
The following experiments are recommended for
practical work. In each experiment, students are
expected to record their observations in tabular form
with units at the column head. Students should plot an
appropriate graph, work out the necessary calculations
and arrive at the result. The teacher may alter or add.
1. Measurement by Vernier callipers. Measure the
diameter of a spherical body. Calculate the
volume with appropriate significant figures.
Measure the volume using a graduated cylinder
and compare it with calculated value.
2. Find the diameter of a wire using a micrometer
screw gauge and determine percentage error in
cross sectional area.
3. Determine radius of curvature of a spherical
surface like watch glass by a spherometer.
4. Equilibrium of three concurrent coplanar forces.
To verify the parallelogram law of forces and to
determine weight of a body.
5. Inclined plane: To find the downward force acting
along the inclined plane on a roller due to
gravitational pull of earth and to study its
relationship with angle of inclination by plotting
graph between force and sin ..
6. Friction: To find the force of kinetic friction for a
wooden block placed on horizontal surface and to
study its relationship with normal reaction.
To determine the coefficient of friction.
7. To find the acceleration due to gravity by
measuring the variation in time period (T) with
effective length (L) of simple pendulum; plot
graph of T .s vL and T2 .s L.
8. To find the force constant of a spring and to study
variation in time period of oscillation of a body
suspended by the spring. To find acceleration due
to gravity by plotting graph of T against vm.
9. Oscillation of a simple meter rule used as bar
pendulum. To study variation in time period (T)
with distance of centre of gravity from axis of
suspension and to find radius of gyration and
moment of inertia about an axis through the centre
of gravity.
10. Boyle's Law: To study the variation in volume
with pressure for a sample of air at constant
temperature by plotting graphs between p and
V1 and between p and V.
11. Cooling curve: To study the fall in temperature of
a body (like hot water or liquid in calorimeter)
with time. Find the slope of curve at four
different temperatures of hot body and hence
deduce Newton's law of cooling.
12. Determine Young's modulus of elasticity using
Searle's apparatus.
13. To study the variation in frequency of air column
with length using resonance column apparatus or
a long cylinder and set of tuning forks. Hence
determine velocity of sound in air at room
temperature.
14. To determine frequency of a tuning fork using a
sonometer.
15. To verify laws of vibration of strings using a
sonometer.
PROJECT WORK AND PRACTICAL FILE –
10 Marks
Project Work – 7 Marks
All candidates will do project work involving some
Physics related topics, under the guidance and regular
supervision of the Physics teacher. Candidates are to
prepare a technical report formally written including
an abstract, some theoretical discussion, experimental
setup, observations with tables of data collected,
analysis and discussion of results, deductions,
conclusion, etc. (after the draft has been approved by
the teacher). The report should be kept simple, but
neat and elegant. No extra credit shall be given for
type-written material/decorative cover, etc. Teachers
may assign or students may choose any one project of
their choice.
Practical File – 3 Marks
Teachers are required to assess students on the basis
of the Physics practical file maintained by them
during the academic year.
CLASS XII
There will be two papers in the subject.
Paper I: Theory - 3 hour ... 70 marks
Paper II: Practical - 3 hours ... 20 marks
Project Work ... 7 marks
Practical File ... 3 marks
PAPER I -THEORY- 70 Marks
Paper I shall be of 3 hours duration and be divided
into two parts.
Part I (20 marks): This part will consist of
compulsory short answer questions, testing
knowledge, application and skills relating to
elementary/fundamental aspects of the entire syllabus.
Part II (50 marks): This part will be divided into
three Sections A, B and C. There shall be three
questions in Section A (each carrying 9 marks) and
candidates are required to answer two questions from
this Section. There shall be three questions in Section
B (each carrying 8 marks) and candidates are
required to answer two questions from this Section.
There shall be three questions in Section C (each
carrying 8 marks) and candidates are required to
answer two questions from this Section. Therefore,
candidates are expected to answer six questions in
Part 2.
Note: Unless otherwise specified, only S. I. units are
to be used while teaching and learning, as well as for
answering questions.
SECTION A
1. Electrostatics
(i) Coulomb's law, S.I. unit of charge;
permittivity of free space.
Review of electrostatics covered in Class X.
Frictional electricity, electric charge
(two types); repulsion and attraction; simple
atomic structure - electrons and protons as
electric charge carriers; conductors,
insulators; quantisation of electric charge;
conservation of charge; Coulomb's law
(in free space only); vector form; (position
coordinates r1, r2 not necessary); SI unit of
charge; Superposition principle; simple
numerical problems.
(ii) Concept of electric field E = F/qo; Gauss'
theorem and its applications.
Action at a distance versus field concept;
examples of different fields; temperature and
pressure (scalar); gravitational, electric and
magnetic (vector field); definition /oEFq=
....
.
Electric field due to a point charge; E..
for
a
group of charges (superposition); A point
charge q in an electric field experiences an
electric force
E..
EFqE=
....
.
Gauss’ theorem: the flux of a vector field;
Q=VA for velocity vector A,V
....
the area
vector, for uniform flow of a liquid. Similarly
for electric field electric flux fE..
,E = EA
for and for uniform . For
non-uniform field fEA..
..
EEAf=·
....
E..
E = .df = . Special
cases for . = 0°, 90° and 180°. Examples,
calculations. Gauss’ law, statement: f..EdA..
..
E =q/.0
or .where fEf=
0qEdA·=.
....
E is for a
closed surface; q is the net charge enclosed,
.o
is the permittivity of free space. Essential
properties of a Gaussian surface.
Applications: 1. Deduce Coulomb's law from
the Gauss’ law and certain symmetry
considerations (No proof required); 2 (a). An
excess charge placed on an isolated
conductor resides on the outer surface; (b)
E..
=0 inside a cavity in an isolated conductor;
(c) E = s/.0
for a point outside; 3. E..
due to
an infinite line of charge, sheet of charge,
spherical shell of charge (inside and outside);
hollow spherical conductor. [Experimental
test of coulomb’s law not included].
(iii) Electric dipole; electric field at a point on the
axis and perpendicular bisector of a dipole;
electric dipole moment; torque on a dipole in
a uniform electric field.
Electric dipole and dipole moment; with unit;
derivation of the at any point, (a) on the E..
axis (b) on the perpendicular bisector of the
dipole, for r>> 2l. [ due to continuous
distribution of charge, ring of charge, disc of
charge etc not included]; dipole in uniform
electric field; net force zero, torque
E..
E..
pEt=×
.......
(iv) Electric lines of force.
A convenient way to visualize the electric
field; properties of lines of force; examples of
the lines of force due to an isolated point
charge (+ve and - ve); dipole, two similar
charges at a small distance; uniform field
between two oppositely charged parallel
plates.
(v) Electric potential and potential energy;
potential due to a point charge and due to a
dipole; potential energy of an electric dipole
in an electric field. Van de Graff generator.
Brief review of conservative forces of which
gravitational force and electric forces are
examples; potential, pd and potential energy
are defined only in a conservative field;
electric potential at a point; definition
VP=W/q0; hence VA -VB = WBA/ q0 (taking q0
from B to A) = (q/4pe0)(1/rA - 1/rB); derive this
equation; also VA = q/4pe0 .1/rA ; for q>0,
VA>0 and for q<0, VA < 0. For a collection of
charges V = sum of the potential due to each
charge; potential due to a dipole on its axial
line and equatorial line; also at any point for
r>>d. Potential energy of a point charge (q)
in an electric field , placed at a point P
where potential is V, is given by U =qV and
.U =q (VE..
A-VB) . The electrostatic potential
energy of a system of two charges = work
done W21=W12 in assembling the system;
U12 or U21 = (1/4pe0 ) q1q2/r12. For a system of
3 charges U123 = U12 + U13 + U23
=
014pe132312121323()
qqqqqqrrr++. For a dipole
in a uniform electric field, the electric
potential energy UE = -p..
.E..
, special case for
f =0, 900 and 1800.
Van de Graff Generator. Potential inside a
charged spherical shell is uniform. A small
conducting sphere of radius r and carrying
charge q is located inside a large shell of
radius R that carries charge Q. The potential
difference between the spheres, V(R) – V(r) =
(q/4peo) (1/R – 1/r) is independent of Q. If the
two are connected, charge always flows from
the inner sphere to the outer sphere, raising
its potential. Sketch of a very simple Van de
Graff Generator, its working and use.
(vi) Capacitance of a conductor C = Q/V, the
farad; capacitance of a parallel-plate
capacitor; C = K.0A/d capacitors in series
and parallel combinations; energy U = 1/2CV2
=
21122QQVC=.
Self-explanatory.
Combinations of capacitors in series and
parallel; effective capacitance and charge
distribution.
(vii) Dielectrics (elementary ideas only);
permittivity and relative permittivity of a
dielectric (.r = ./.o). Effects on pd, charge
and capacitance.
Dielectric constant Ke = C'/C; this is also
called relative permittivity Ke = .r = ./.o;
elementary ideas of polarization of matter in a
uniform electric field qualitative discussion;
induced surface charges weaken the original
field; results in reduction in and hence, in
pd, (V); for charge remaining the same
Q = CV = C' V' = KE..
e . CV' ; V' = V/Ke;
and
eEEK'=; if the C is kept connected with
the source of emf, V is kept constant V = Q/C
= Q'/C' ; Q'=C'V = Ke . CV= Ke . Q
increases; For a parallel plate capacitor with
a dielectric in between C' = KeC = Ke ..o
.
A/d = .r
..o
.A/d. Then, 0rACd.''=
.......
;
extending this to a partially filled capacitor
C' =.oA/(d-t + t/.r). Spherical and cylindrical
capacitors (qualitative only).
2. Current Electricity
(i) Steady currents; sources of current, simple
cells, secondary cells.
Sources of emf: Mention: Standard cell, solar
cell, thermo-couple and battery, etc. simple
cells, acid/alkali cells - qualitative
description.
(ii) Potential difference as the power supplied
divided by the current; Ohm's law and its
limitations; Combinations of resistors in series
and parallel; Electric energy and power.
Definition of pd, V = P/ I; P = V I;
electrical energy consumed in time
t is E=Pt= VIt; using ohm’s law
E = VIt = tRV2
= I2Rt. Electric power
consumed P = VI = V2 /R = I2 R ; SI units;
commercial units; electricity consumption and
billing. Ohm's law, current density s = I/A;
experimental verification, graphs and slope,
ohmic resistors; examples; deviations.
Derivation of formulae for combination of
resistors in series and parallel; special case
of n identical resistors; Rp = R/n.
(iii) Mechanism of flow of current in metals, drift
velocity of charges. Resistance and resistivity
and their relation to drift velocity of electrons;
description of resistivity and conductivity
based on electron theory; effect of
temperature on resistance, colour coding of
resistance.
Electric current I = Q/t; atomic view of
flow of electric current in metals; I=vdena.
Electron theory of conductivity; acceleration
of electrons, relaxation time t;
derive s = ne2t/m and . = m/ne2 t; effect of
temperature on resistance. Resistance R= V/I
for ohmic substances; resistivity ., given by R
= ..l/A; unit of . is O.m; conductivity
s=1/. ; Ohm’s law as = s J
..
E..
; colour
coding of resistance.
(iv) Electromotive force in a cell; internal
resistance and back emf. Combination of cells
in series and parallel.
The source of energy of a seat of emf (such as
a cell) may be electrical, mechanical, thermal
or radiant energy. The emf of a source is
defined as the work done per unit charge to
force them to go to the higher point of
potential (from -ve terminal to +ve terminal
inside the cell) so, e = dW /dq; but dq = Idt ;
dW = edq = eIdt . Equating total work done
to the work done across the external resistor
R plus the work done across the internal
resistance r; eIdt=I2R dt + I2rdt; e =I (R + r);
I=e/( R + r ); also IR +Ir = e or V=e- Ir
where Ir is called the back emf as it acts
against the emf e; V is the terminal pd.
Derivation of formula for combination of cells
in series, parallel and mixed grouping.
(v) Kirchoff's laws and their simple applications
to circuits with resistors and sources of emf;
Wheatstone bridge, metre-bridge and
potentiometer; use for comparison of emf and
determination of internal resistance of sources
of current; use of resistors (shunts and
multipliers) in ammeters and voltmeters.
Statement and explanation with simple
examples. The first is a conservation law for
charge and the 2nd is law of conservation of
energy. Note change in potential across a
resistor .V=IR<0 when we go ‘down’ with
the current (compare with flow of water down
a river), and .V=IR>0 if we go up against the
current across the resistor. When we go
through a cell, the -ve terminal is at a lower
level and the +ve terminal at a higher level,
so going from -ve to +ve through the cell, we
are going up and .V=+e and going from +ve
to -ve terminal through the cell we are going
down, so .V = -e. Application to simple
circuits. Wheatstone bridge; right in the
beginning take Ig=0 as we consider a
balanced bridge, derivation of R1/R2 = R3/R4
is simpler [Kirchoff’s law not necessary].
Metre bridge is a modified form of
Wheatstone bridge. Here R2 = l1p and R4 =l2
p; R1/R3 = l1/l2 . Potentiometer: fall in
potential .V a .l - conditions; auxiliary emf
e1
is balanced against the fall in potential V1
across length l1 . e1 = V1 =Kl1 ; e1/e2
= l1/l2;
potentiometer as a voltmeter. Potential
gradient; comparison of emfs; determination
of internal resistance of a cell. Conversion of
galvanometer to ammeter and voltmeter and
their resistances.
(vi) Heating effect of a current (Joule's law).
Flow of electric charge (current) in a
conductor causes transfer of energy from the
source of electricity (may be a cell or
dynamo), to the conductor (resistor), as
internal energy associated with the vibration
of atoms and observed as increase in
temperature. From the definition of pd,
V=W/q; W = .U = qV = VIt. The rate of
energy transfer .U/t = VI or power
P = VI = I2R=V2/R using Ohm's law. This is
Joule,s law. This energy transfer is called
Joule heating. SI unit of power. Experimental
verification of Joule’s law.
(vii) Thermoelectricity; Seebeck effect;
measurement of thermo emf; its variation with
temperature. Peltier effect.
Discovery of Seebeck effect. Seebeck series;
Examples with different pairs of metals (for
easy recall remember - hot cofe and ABC -
from copper to iron at the hot junction and
from antimony to bismuth at the cold junction
for current directions in thermocouple);
variation of thermo emf with temperature
differences, graph; neutral temperature,
temperature of inversion; slope:
thermoelectric power e = af + 1/2ß f 2 (no
derivation), S = de/d = a+ß. The
comparison of Peltier effect and Joule effect.
ff
3. Magnetism
(i) Magnetic field B..
, definition from magnetic
force on a moving charge; magnetic field
lines. Superposition of magnetic fields;
magnetic field and magnetic flux density; the
earth's magnetic field; Magnetic field of a
magnetic dipole; tangent law.
Magnetic field represented by the symbol Bis
now defined by the equation x oFqV=
....
B..
(which comes later under subunit 4.2; B..
is
not to be defined in terms of force acting on a
unit pole, etc; note the distinction of B..
from
is that E..B..
forms closed loops as there are
no magnetic monopoles, whereas E..
lines
start from +ve charge and end on -ve charge.
Magnetic field lines due to a magnetic dipole
(bar magnet). Magnetic field in end-on and
broadside-on positions (No derivations).
Magnetic flux fB =B..
.= BA for B uniform
and
A..
B..
A..
; i.e. area held perpendicular to
B..
. For f = BA(B..
A..
); B=f/A is the flux
density [SI unit of flux is weber (Wb)]; but
note that this is not correct as a defining
equation as B..
is vector and f and f/A are
scalars, unit of B is tesla (T) equal to
10-4 gauss. For non-uniformB..
field,
f = .df=.B..
.dA
..
. Earth's magnetic field B..
E
is uniform over a limited area like that of a
lab; the component of this field in the
horizontal directions BH is the one effectively
acting on a magnet suspended or pivoted
horizontally. An artificial magnetic field is
produced by a current carrying loop (see 4.2)
B..
c, or a bar magnet B..
m in the horizontal
plane with its direction adjusted
perpendicular to the magnetic meridian; this
is superposed over the earth's fields B..
H
which is always present along the magnetic
meridian. The two are then perpendicular to
each other; a compass needle experiences a
torque exerted by these fields and comes to an
equilibrium position along the resultant field
making an angle with ø with BH. Then Bc -
or Bm =BH tan ø. This is called tangent law.
Deflection Magnetometer, description, setting
and its working.
(ii) Properties of dia, para and ferromagnetic
substances; susceptibility and relative
permeability
It is better to explain the main distinction, the
cause of magnetization (M) is due to magnetic
dipole moment (m) of atoms, ions or
molecules being 0 for dia, >0 but very small
for para and > 0 and large for ferromagnetic
materials; few examples; placed in external
B..
, very small (induced) magnetization in a
direction opposite to B..
in dia, small
magnetization parallel to B..
for para, and
large magnetization parallel to B..
for
ferromagnetic materials; this leads to lines
of B..
becoming less dense, more dense and
much more dense in dia, para and ferro,
respectively; hence, a weak repulsion for dia,
weak attraction for para and strong attraction
for ferro - - - - - also a small bar suspended in
the horizontal plane becomes perpendicular
to the B..
field for dia and parallel to B..
for
para and ferro. Defining equation H = (B/µ0)-
M; the magnetic properties, susceptibility
.m = (M/H) < 0 for dia (as M is opposite H)
and >0 for para, both very small, but very
large for ferro; hence relative permeability
µr
=1+ .m < 1 for dia, > 1 for para and
>>1(very large) for ferro; further, .m.1/T
(Curie’s law) for para, independent of
temperature (T) for dia and depends on T in
a complicated manner for ferro; on heating
ferro becomes para at Curie temperature.
4. Electromagnetism
(i) Oersted's experiment; Biot-Savart law, the
tesla; magnetic field near a long straight wire,
at the centre of a circular loop, and at a point
on the axis of a circular coil carrying current
and a solenoid. Amperes circuital law and its
application to obtain magnetic field due to a
long straight wire; tangent galvanometer.
Only historical introduction through
Oersted’s experiment. [Ampere’s swimming
rule not included]. Biot-Savart law in vector
form; application; derive the expression for B
(i) near a very long wire carrying current;
direction of B..
using right hand (clasp) rule-
no other rule necessary; (ii) at the centre of a
circular loop carrying current; (iii) at any
point on its axis. Current carrying loop as a
magnetic dipole. Ampere’s Circuital law:
statement and brief explanation. Apply it to
obtainB..
near a long wire carrying current.
Tangent galvanometer- theory, working, use,
advantages and disadvantages.
(ii) Force on a moving charge in a magnetic field;
force on a current carrying conductor kept in a
magnetic field; force between two parallel
current carrying wires; definition of the
ampere based on the force between two
current carrying wires. Cyclotron (simple
idea).
Lorentz force equation .BFqvB=×
......;
special cases, modify this equation
substituting dtld/ for v and I for q/dt to yield
F
..
= Idl×
..
B..
for the force acting on a
current carrying conductor placed in a B..
field. Derive the expression for force between
two long parallel wires carrying current,
using Biot-Savart law and = IF
..
dl×
..
B..
;
define ampere the base unit of SI and hence,
coulomb from Q = It. Simple ideas about
working of a cyclotron, its principle, and
limitations.
(iii) A current loop as a magnetic dipole; magnetic
dipole moment; torque on a current loop;
moving coil galvanometer.
Derive the expression for torque on a current
carrying loop placed in a uniformB..
, using
F = IlB and t= Fr×= NIAB sinf for N
turns t =mxB, where the dipole moment
m= ANI unit: A.m2. A current carrying loop
is a magnetic dipole; directions of current
and B..
and m..
using right hand rule only; no
other rule necessary. Mention orbital magnetic
moment of electrons in Bohr model of H atom.
Moving coil galvanometer; construction,
principle, working, theory I= kf,advantages
over tangent galvanometer.
(iv) Electromagnetic induction, magnetic flux and
induced emf; Faraday's law and Lenz's law;
transformers; eddy currents.
Magnetic flux, change in flux, rate of change
of flux and induced emf; Faraday’s law
e = -df/dt, [only one law represented by this
equation]. Lenz's law, conservation of energy;
motional emf e = Blv, and power
P = (Blv)2/R; eddy currents (qualitative);
transformer (ideal coupling), principle,
working and uses; step up and step down;
energy losses.
(v) Mutual and self inductance: the henry.
Growth and decay of current in LR circuit
(dc) (graphical approach), time constant.
Mutual inductance, illustrations of a pair of
coils, flux linked f2
= MI1; induced emf
22ddtfe==M1dIdt. Definition of M as
M =
1212M IordtdIfe=. SI unit henry.
Similar treatment for LdtdIe=;
henry = volt. second/ampere [expressions for
coefficient of self inductance L and mutual
inductance M, of solenoid/coils and
experiments, not included]. R-L circuit;
induced emf opposes changes, back emf is set
up, delays starting and closing, graphical
representation of growth and decay of current
in an R-L circuit [no derivation]; define and
explain time constant from the graph; t =L/R
(result only). Unit of t = unit of time =
second. Hence, this name ‘Time Constant’.
(vi) Simple a.c. generators.
Principle, description, theory and use.
(v) Comparison of a.c. with d.c.
Variation in current and voltage with time for
a.c. and d.c.
5. Alternating Current Circuits
(i) Change of voltage and current with time, the
phase difference; peak and rms values of
voltage and current; their relation in
sinusoidal case.
Sinusoidal variation of V and I with time, for
the output from an ac generator; time period,
frequency and phase changes; rms value of V
and I in sinusoidal cases only.
(ii) Variation of voltage and current in a.c.
circuits consisting of only resistors, only
inductors and only capacitors (phasor
representation), phase lag and phase lead.
May apply Kirchoff’s law and obtain simple
differential equation (SHM type), V = Vo sin
.t, solution I = I0 sin .t, I0sin (.t + p/2) and
I0 sin (.t - p/2) for pure R, C and L circuits,
respectively. Draw phase (or phasor)
diagrams showing voltage and current and
phase lag or lead; resistance R, inductive
reactance XL, XL=.L and capacitative
reactance XC, XC = 1/.C and their mutual
relations. Graph of XL and XC vs f.
(iii) The LCR series circuit: phasor diagram,
expression for V or I; phase lag/lead;
impedance of a series LCR circuit (arrived at
by phasor diagram); Special cases for RL and
RC circuits.
RLC circuit in single loop, note the pd across
R, L and C; [the more able students may use
Kirchoff’s law and obtain the differential
equation]. Use phasor diagram method to
obtain expression for I or V and the net phase
lag/lead; use the results of 5(ii), V lags I by
p/2 in a capacitor, V leads I by p/2 in an
inductor, V and I are in phase in a resistor, I
is the same in all three; hence draw phase
diagram, combine VL and Vc (in opposite
phase; phasors add like vectors) to give
V=VR+VL+VC (phasor addition) and the max.
values are related by V2m=V2RM+(VLm-VCm)2 .
Substituting pd=current x resistance or
reactance, we get Z2 = R2+(XL-Xc) 2 and tanf
= (VL m -VCm)/VRm = (XL-Xc)/R giving I = I m
sin (wt-f) where I m =Vm/Z etc. Special cases
for RL and RC circuits. Graph of Z vs f.
(iv) Power P associated with LCR circuit
= 1/2VoIo cosf =VrmsIrms cosf; power absorbed
and power dissipated; choke coil (choke and
starter); electrical resonance; oscillations in an
LC circuit (. = 1/ vLC).
Average power consumed averaged over a
full cycle P=(1/2) em. I m cosf. Power factor
cosf = R/Z. Special case for pure R , L, C;
choke coil:- XL controls current but cosf = 0,
hence P=0; LC circuit; at resonance with
XL=Xc , Z=Zmin= R, power delivered to circuit
by the source, is maximum; .2 = 1/LC;
f =
p.2.
SECTION B
6. Wave Optics
(i) Complete electromagnetic spectrum from
radio waves to gamma rays; transverse nature
of electromagnetic waves, Huygen's principle;
laws of reflection and refraction from
Huygen's principle. Speed of light.
Qualitative descriptions only, but some wave
length range values may be noted; common
features of all regions of em spectrum
including transverse nature (E..
andB..
perpendicular to ); special features of the
common classification (gamma rays, X rays,
UV rays, visible spectrum, IR, microwaves,
radio and TV waves) in their production
(source), propagation, modulation and
demodulation (qualitative only) – AM and
FM, interaction with matter, detection and
other properties; uses; approximate range of
. or f or at least proper order of increasing f
or .. Huygen’s principle: wavefronts -
different types/shapes, rays: Huygen’s
construction and Huygen’s principle; proof of
laws of reflection and refraction using this.
[Refraction through a prism and lens on the
basis of Huygen’s theory: Not required].
Michelson’s method to determine the speed of
light.
C..
(ii) Conditions for interference of light,
interference of monochromatic light by
double slit; measurement of wave length.
Fresnel’s biprism.
Phase of wave motion; superposition of
identical waves at a point, path difference and
phase difference; coherent and incoherent
light waves; interference- constructive and
destructive, conditions for sustained
interference of light waves [mathematical
deduction of interference from the equations
of two progressive waves with a phase
difference is not to be done]. Young's double
slit experiment, set up, diagram, geometrical
deduction of path difference . = d sin Ø,
between waves (rays) from the two slits; using
.=n. for bright fringe and (n+½). for dark
fringe and sin Ø = tan Ø =yn /D as y and Ø
are small, obtain yn=(D/d)n. and fringe width
ß=(D/d). etc. Experiment of Fresnel biprism
(qualitative only). Measurement of ß using a
telescope; determination of ., using dDß.=.
(iii) Single slit Fraunhofer diffraction (elementary
explanation).
Diffraction at a single slit experimental setup,
diagram, diffraction pattern, position of
secondary maxima, conditions for secondary
maxima, a sin.n
=(2n+1)./2, for secondary
minima a sin.n= n., where n = 1,2,3 …;
distribution of intensity with angular distance;
angular width of central bright fringe.
Mention diffraction by a grating and its use in
determining wave length of light (Details not
required).
(iv) Plane polarised electromagnetic wave
(elementary idea), polarisation of light by
reflection. Brewster's law; polaroids.
Review description of an electromagnetic
wave as transmission of energy by periodic
changes in E..
and B..
along the path;
transverse nature as and E..
B..
are
perpendicular to C..
(velocity). These three
vectors form a right handed system, so that
E.. x B..
is alongC..
, they are mutually
perpendicular to each other. For ordinary
light, E..
and B..
are in all directions in a
plane perpendicular to the C..
vector-
unpolarised waves. If
..
and (hence EB..
also)
is confined to a single line only (.C..
, we have
linearly polarized light. The plane containing
E..
(or B..
) and remains fixed. Hence, a
linearly polarised light is also called plane
polarised light. Plane of polarisation;
polarisation by reflection; Brewster’s law:
tan iC..
p=n; refracted ray is perpendicular to
reflected ray for i = ip; ip+rp = 90° ;
polaroids; use in production and
detection/analysis of polarised light., other
uses.
7. Ray Optics and Optical Instruments
(i) Refraction of light at a plane interface (Snell's
law); total internal reflection and critical
angle; total reflecting prisms and optical
fibres.
Self-explanatory. Simple applications;
numerical problems included.
(ii) Refraction through a prism, minimum
deviation and derivation of relation between
n, A and dmin.
Include explanation of i-d graph, i1 = i2 = i
(say) for dm; from symmetry r1 = r2; refracted
ray inside the prism is parallel to the base of
the prism; application to triangular prisms
with angle of the prism 300, 450, 600 and 900
respectively; ray diagrams.
(iii) Refraction at a single spherical surface
(relation between n1, n2, u, v and R);
refraction through thin lens (lens maker's
formula and formula relating u, v, f, n, R1 and
R2); combined focal length of two thin lenses
in contact. Combination of lenses [Silvering
of lens excluded].
Self-explanatory.
Limit detailed discussion to one case only-
convex towards rarer medium, for spherical
surface and real image. For lens, derivation
only for biconvex lens with R1= R2; extend the
results to biconcave lens, plano convex lens
and lens immersed in a liquid; do also power
of a lens P=1/f with SI unit dioptre. For
lenses in contact 1/F= 1/f1+1/f2 and P=P1+P2.
Formation of image and determination of
focal length with combination of thin lenses.
(iv) Dispersion; dispersive power; production of
pure spectrum; spectrometer and its setting
(experimental uses and procedures included);
absorption and emission spectra; spherical and
chromatic aberration; derivation of condition
for achromatic combination of two thin lenses
in contact and not of prism.
Angular dispersion; dispersive power,
conditions for pure spectrum; spectrometer
with experiments for A and d. Hence, dm
and n; rainbow - ray diagram (no derivation).
Simple explanation. Spectra: emission
spectra; line; band and continuous spectra-
their source and qualitative explanation;
absorption spectra - condition; solar spectrum
and Fraunhoffer lines, spherical aberration in
a convex lens (qualitative only), how to reduce
linear or axial chromatic aberration,
derivations, condition for achromatic
combination of two lenses in contact.
(v) Simple microscope; Compound microscope
and their magnifying power.
For microscope - magnifying power for image
at least distance of distinct vision and at
infinity; ray diagrams, numerical problems
included.
(vi) Simple astronomical telescope (refracting and
reflecting), magnifying power and resolving
power of a simple astronomical telescope.
Ray diagrams of reflecting as well as
refracting telescope with image at infinity
only; simple explanation; magnifying power;
resolving power, advantages, disadvantages
and uses.
SECTION C
8. Electrons and Photons
(i) Cathode rays: measurement of e/m for
electrons. Millikan’s oil drop experiment.
Production of cathode rays – only brief and
qualitative [historical details not included].
Thomson’s experiment to measure e/m of
electrons: e/m=(½V) (E/B)2.
Thermionic emission, deflection of charged
particle by E..
andB..
, and fluorescence
produced by electron. Millikan’s oil drop
experiment - quantization of charge.
(ii) Photo electric effect, quantization of
radiation; Einstein's equation; threshold
frequency; work function; energy and
momentum of photon. Determination of
Planck’s Constant.
Experimental facts; do topics as given; note
Einstein used Planck’s ideas and extended it
to apply for radiation (light); photoelectric
effect can be explained only assuming
quantum (particle) nature of radiation.
Theory and experiment for determination of
Planck’s constant (from the graph of stopping
potential V versus frequency f of the incident
light). Momentum of photon p=E/c=hf/c=h/..
(iii) Wave particle duality, De Broglie equation,
phenomenon of electron diffraction
(informative only).
Dual nature of radiation already discussed;
wave nature in interference, diffraction
and polarization; particle nature in
photoelectric effect and Compton effect. Dual
nature of matter: particle nature common in
that it possess momentum p=mv and kinetic
energy K=½mv2. The wave nature of matter
was proposed by Louis de Broglie .=h/p=
h/mv. Davisson and Germer experiment;
qualitative description and discussion of the
experiment, polar graph. No numerical
problem.
9. Atoms
(i) Charge and size of nuclei (a-particle
scattering); atomic structure; Bohr's
postulates, Bohr's quantization condition; radii
of Bohr orbits for hydrogen atom; energy of
the hydrogen atom in the nth state; line
spectra of hydrogen and calculation of E and f
for different lines.
Rutherford’s nuclear model of atom
(mathematical theory of scattering excluded),
based on Geiger - Marsden experiment on
a-scattering; nuclear radius r in terms of
closest approach of a particle to the nucleus,
obtained by equating .K=½ mv2 of the a
particle to the change in electrostatic
potential energy .U of the system
[(1/4pe0(2e)(Ze)/r0]; r0~10-15m =1 fm or 1
fermi; atomic structure; only general
qualitative ideas, including, atomic number Z,
Neutron number N and mass number A. A
brief account of historical background
leading to Bohr’s theory of hydrogen spectra;
empirical formula for Lyman, Balmer and
Paschen series. Bohr’s model of H atom,
postulates (Z=1); expressions for orbital
velocity, kinetic energy, potential energy,
radius of orbit and total energy of electron.
Energy level diagram for n=1,2,3…
calculation of .E, frequency and wavelength
of different lines of emission spectra;
agreement with experimentally observed
values. [Use nm and not Å for unit of .].
(ii) Production of X-rays; maximum frequency
for a given tube potential. Characteristic and
continuous X -rays. Moseley’s law.
A simple modern X-ray tube – main parts: hot
cathode, heavy element target kept cool and
anode, all enclosed in a vacuum tube;
elementary theory of X-ray production; effect
of increasing filament current- temperature
increases rate of emission of electrons (from
the cathode), rate of production of X rays and
hence, intensity of X rays increases (not its
frequency); increase in anode potential
increases energy of each electron, each X-ray
photon and hence, X-ray frequency (E=hf);
maximum frequency hfmax=eV; continuous
spectrum of X rays has minimum wavelength
. min= c/fmax. Moseley’s law. Characteristic
and continuous X-rays; origin.
10. Nuclei
(i) Atomic masses; unified atomic mass unit u
and its value in MeV; the neutron;
composition and size of nucleus; mass defect
and binding energy.
Atomic masses; unified atomic mass unit,
symbol u, 1u=1/12 of the mass of C12 atom =
1.66x10-27kg). Composition of nucleus; mass
defect and binding energy BE=(.m)c2.
Graph of BE/nucleon versus mass number A,
special features - low for light as well as
heavy elements. Middle order more stable
[see fission and fusion in 11.(ii), 11.(iii)].
(ii) Radioactivity: nature and radioactive decay
law, half-life, mean life and decay constant.
Nuclear reactions.
Discovery; spontaneous disintegration of an
atomic nucleus with the emission of a or ß
particles and . radiation, unaffected by
ordinary chemical changes. Radioactive
decay law; derivation of N = Noe-.t ; half life
period T; graph of N versus t, with T marked
on the X axis. Relation between T and .;
mean life t and .. Value of T of some common
radioactive elements. Examples of few
nuclear reactions with conservation of
nucleon number and charge. (neutrino to be
included.
[Mathematical theory of a and ß decay not
included]. Changes taking place within the
nucleus included.
11. Nuclear Energy
(i) Energy - mass equivalence.
Einstein’s equation E=mc2. Some
calculations. (already done under 10.(i));
mass defect/binding energy, mutual
annihilation and pair production as examples.
(ii) Nuclear fission; chain reaction; principle of
operation of a nuclear reactor.
(iii) Nuclear fusion; thermonuclear fusion as the
source of the sun's energy.
Theoretical (qualitative) prediction of
exothermic (with release of energy) nuclear
reaction, in fusing together two light nuclei to
form a heavier nucleus and in splitting heavy
nucleus to form middle order (lower mass
number) nucleus, is evident from the shape of
BE per nucleon versus mass number graph.
Also calculate the disintegration energy Q for
a heavy nucleus (A=240) with BE/A ~ 7.6
MeV per nucleon split into two equal halves
with A=120 each and BE/A ~ 8.5
MeV/nucleon; Q ~ 200 MeV. Discovery of
fission. Any one equation of fission reaction.
Chain reaction- controlled and uncontrolled;
nuclear reactor and nuclear bomb. Main
parts of a nuclear reactor including a simple
diagram and their functions - fuel elements,
moderator, control rods, coolant, casing;
criticality; utilization of energy output - all
qualitative only. Fusion, simple example of
4 1H.4He and its nuclear reaction equation;
requires very high temperature ~ 106
degrees; difficult to achieve; hydrogen bomb;
thermonuclear energy production in the sun
and stars. [Details of chain reaction not
required].
12. Semiconductor Devices
(i) Energy bands in solids; energy band diagrams
for distinction between conductors, insulators
and semi-conductors - intrinsic and extrinsic;
electrons and holes in semiconductors.
Elementary ideas about electrical conduction
in metals [crystal structure not included].
Energy levels (as for hydrogen atom), 1s, 2s,
2p, 3s , etc. of an isolated atom such as that of
copper; these split, eventually forming
‘bands’ of energy levels, as we consider solid
copper made up of a large number of isolated
atoms, brought together to form a lattice;
definition of energy bands - groups of closely
spaced energy levels separated by band gaps
called forbidden bands. An idealized
representation of the energy bands for a
conductor, insulator and semiconductor;
characteristics, differences; distinction
between conductors, insulators and
semiconductors on the basis of energy bands,
with examples; qualitative discussion only;
energy gaps (eV) in typical substances
(carbon, Ge, Si); some electrical properties of
semiconductors. Majority and minority
charge carriers - electrons and holes;
intrinsic and extrinsic, doping, p-type, n-type;
donor and acceptor impurities. [No numerical
problems from this topic].
(ii) Junction diode; depletion region; forward and
reverse biasing current - voltage
characteristics; pn diode as a half wave and a
full wave rectifier; solar cell, LED and
photodiode. Zener diode and voltage
regulation.
Junction diode; symbol, simple qualitative
description only [details of different types of
formation not included]. The topics are self
explanatory. [Bridge rectifier of 4 diodes not
included]. Simple circuit diagram and graphs,
function of each component - in the electric
circuits, qualitative only. Elementary ideas on
solar cell, photodiode and light emitting diode
(LED) as semi conducting diodes. Self
explanatory.
(iii) The junction transistor; npn and pnp
transistors; current gain in a transistor;
transistor (common emitter) amplifier (only
circuit diagram and qualitative treatment) and
oscillator.
Simple qualitative description of construction
- emitter, base and collector; npn and pnp
type; symbol showing directions of current in
emitter-base region (one arrow only)- base is
narrow; current gain in transistor; common
emitter configuration only, characteristics;
IB vs VBE and IC vs VCE with circuit
diagram; no numerical problem; common
emitter transistor amplifier - correct
diagram; qualitative explanation including
amplification, wave form and phase reversal.
[relation between a, ß not included, no
numerical problems]. Circuit diagram and
qualitative explanation of a simple oscillator.
(iv) Elementary idea of discreet and integrated
circuits, analogue and digital circuits. Logic
gates (symbols; working with truth tables;
applications and uses) - NOT, OR, AND,
NOR, NAND.
Self explanatory. Advantages of IC.
Introduction to elementary digital electronics.
Logic gates as given; symbols, input and
output, Boolean equations (Y=A+B etc), truth
table, qualitative explanation. [No numerical
problems. Realisation not included].
PAPER II
PRACTICAL WORK- 20 Marks
The experiments for laboratory work and practical
examinations are mostly from two groups;
(i) experiments based on ray optics and
(ii) experiments based on current electricity.
The main skill required in group (i) is to remove
parallax between a needle and the real image of
another needle. In group (ii), understanding circuit
diagram and making connections strictly following the
given diagram is very important. Take care of
polarity of cells and meters, their range, zero error,
least count, etc. A graph is a convenient and effective
way of representing results of measurement.
Therefore, it is an important part of the experiment.
Usually, there are two graphs in all question papers.
Students should learn to draw graphs correctly noting
all important steps such as title, selection of origin,
labelling of axes (not x and y), proper scale and the
units given along each axis. Use maximum area of
graph paper, plot points with great care, mark the
points plotted with or and draw the best fit
straight line (not necessarily passing through all the
plotted points), keeping all experimental points
symmetrically placed (on the line and on the left and
right side of the line) with respect to the best fit thin
straight line. Read intercepts carefully. Y intercept
i.e. y
...
0 is that value of y when x = 0. Slope ‘m’ of the
best fit line should be found out using two distant
points, one of which should be unplotted point, using
2121yymxx-
=
-
.
NOTE:
Short answer questions may be set from each
experiment to test understanding of theory and logic
of steps involved.
The list of experiments given below is only a general
recommendation. Teachers may add, alter or modify
this list, keeping in mind the general pattern of
questions asked in the annual examinations.
1. Draw the following set of graphs using data from
lens experiments -
i) . against u. It will be a curve.
ii) Magnification vum.=.
..
against . and to find
focal length by intercept.
iii) y = 100/v against x = 100/u and to find f
by intercepts.
2. To find f of a convex lens by using u-v method.
3. To find f of a convex lens by displacement
method.
4. Coaxial combination of two convex lenses not in
contact.
5. Using a convex lens, optical bench and two pins,
obtain the positions of the images for various
positions of the object; f<u<2f, u~2f, and u>2f.
Plot a graph of y=100/v versus x=100/u. Obtain
the focal length of the lens from the intercepts,
read from the graph.
6. Determine the focal length of a concave lens,
using an auxiliary convex lens, not in contact and
plotting appropriate graph.
7. Refractive index of material of lens by Boys'
method.
8. Refractive index of a liquid by using convex lens
and plane mirror.
9. Using a spectrometer, measure the angle of the
given prism and the angle of minimum deviation.
Calculate the refractive index of the material.
[A dark room is not necessary].
10. Set up a deflection magnetometer in Tan-A
position, and use it to compare the dipole
moments of the given bar magnets, using
(a) deflection method, neglecting the length of the
magnets and (b) null method.
11. Set up a vibration magnetometer and use it to
compare the magnetic moments of the given bar
magnets of equal size, but different strengths.
12. Determine the galvanometer constant of a tangent
galvanometer measuring the current (using an
ammeter) and galvanometer deflection, varying
the current using a rheostat. Also, determine the
magnetic field at the centre of the galvanometer
coil for different values of current and for
different number of turns of the coil.
13. Using a metre bridge, determine the resistance of
about 100 cm of constantan wire, measure its
length and radius and hence, calculate the specific
resistance of the material.
14. Verify Ohm’s law for the given unknown
resistance (a 60 cm constantan wire), plotting a
graph of potential difference versus current. From
the slope of the graph and the length of the wire,
calculate the resistance per cm of the wire.
15. From a potentiometer set up, measure the fall in
potential for increasing lengths of a constantan
wire, through which a steady current is flowing;
plot a graph of pd V versus length l. Calculate the
potential gradient of the wire. Q (i) Why is the
current kept constant in this experiment? Q (ii)
How can you increase the sensitivity of the
potentiometer? Q (iii) How can you use the above
results and measure the emf of a cell?
16. Compare the emf of two cells using a
potentiometer.
17. To study the variation in potential drop with
length of slide wire for constant current, hence to
determine specific resistance.
18. To determine the internal resistance of a cell by
potentiometer device.
19. Given the figure of merit and resistance of a
galvanometer, convert it to (a) an ammeter of
range, say 2A and (b) a voltmeter of range 4V.
Also calculate the resistance of the new ammeter
and voltmeter.
20. To draw I-V characteristics of a semi-conductor
diode in forward and reverse bias.
21. To draw characteristics of a Zener diode and to
determine its reverse breakdown voltage.
22. To study the characteristics of pnp/npn transistor
in common emitter configuration.
PROJECT WORK AND PRACTICAL FILE –
10 Marks
Project Work – 7 Marks
The Project work is to be assessed by a Visiting
Examiner appointed locally and approved by the
Council.
All candidates will do project work involving some
physics related topics, under the guidance and regular
supervision of the Physics teacher.
Candidates are to prepare a technical report formally
written including an abstract, some theoretical
discussion, experimental setup, observations with
tables of data collected, analysis and discussion of
results, deductions, conclusion, etc. (after the draft has
been approved by the teacher). The report should be
kept simple, but neat and elegant. No extra credit shall
be given for typewritten material/decorative cover,
etc. Teachers may assign or students may choose any
one project of their choice.
Practical File – 3 Marks
The Visiting Examiner is required to assess students
on the basis of the Physics practical file maintained by
them during the academic year.
GREAT DA
ReplyDeleteTHANKS DA........
DeleteI want syllabus of chemistry also.Will you please post chemistry syllabus..
DeleteIs it 2013th syllabus?
ReplyDelete